List of Items - note: this list was prepared from the Secured Party's appraisal - there may be changes when we catalog what is actually on-site.                    

METALWORKING:

Accurshear Hydraulic power squaring shear with with 120" squaring arm, model 625010, sn. 3491, 1999 model, with two front table extensions and SC2 digital readout power back gauge;

Accurpress hydraulic press brake, model 717512, sn. 5906, 1999 model, 175 tons x 12', motorized ram adjustment and motorized back gauge;

Amada model SPH-60 press brake, mechanical, sn. 605881, 40" x 17-1/2" bed, with manual back gauge;

Pacific hydraulic press brake, model J110-10, sn. 6501, 1975 model, 110Ton x 10', 3/16"x9' capacity, with back gauge and CNC 99 control;

Dreis & Krump Chicago mechanical press brake, sn. L-16528 60-90 tons x 12" with motorized ram adjuster, air clutch, manual back gauge;

brake dies;

Amada PEGA CNC 58-station turret punch fabricating center, model PEGA-344, Sn P3440242, with factory Amada Fanuc control, large complement of thick turret punch tooling;

Amada tool and die grinder;

Strippit mode Super 30/40 auto punch with gauge table, sn. 06892970;

factory cabinet of punch tooling and Strippit punch/die grinding accessory unit;

Mega-Punch by Penn Tech Associates, C-frame hydraulic punch, model SMGP35, sn. B010, with side tables;

Roundo plate roll by Comeq, 3/16"x6', model PSE-150, Sn. 007180, 5-1/2" rolls, 2000 model;

Haeger inserting press, model HP6C-2, Sn. 2857, 1994 model;

Haeger inserting press, sn. 651;

Wilton 10"x15" horizontal band saw, model 7000, sn. 203096, equipped with roller conveyor infeed;

Rockwell /  Delta vertical band saw, 14" throat;

Craftsman double end bench grinder;

Buffalo floor model drill press, early vintage;

Scotchman cold saw, sn. 910, with roller conveyor infeed and outfeed tables;

Bliss O.B.I. Punch press;

Baldor floor model heavy duty 8" double end grinder;

FORK LIFTS:

Hyster fork lift truck, model H550P, 54000lb capacity, sn.. E008D015585;

Caterpillar model V225 forklift truck, sn. 21V504 - D, 22500lb capacity;

Caterpillar 90 forklift truck, model GPL40, sn. AT-29A-00218, 9,000lb capacity;

Hyster fork lift truck, model 3160A, sn. A240-175N;

Hyster fork lift truck, sn. C00202756A;

Hyster model S-150A forklift truck, 16,000lb cap, sn. A24D-1745N, gas engine;

Clark 4,000lb capacity fork lift truck, model EC500-50, sn. E355-650-2344

AIR COMPRESSORS:

Sullair air compressor, model 8E-15-0-H, sn. 003-88045, with sound enclosure and Pioneer model R75A air drier;

Campbell Hausfeld 10hp air compressor with horizontal air receiver and custom sound enclosure and Speedair dryer;

GENERATOR SET:  

Enclosed generator set, consisting of (2) Caterpillar powered generators, sn. 2B-7720 and 63972;  

(2) LoadTec load banks and control panels, model ODL2-1000.1, sn.'s 200368 and 200370;

WELDERS:  

Rocker-style spot welding station, type FRU30, sn. 4521, 30KVA, with 24" throat;

Miller spot welder on recoil mount, style JD48;

Rex rocker-style spot welding station, type RA3-18, sn. 39124-100, 50KVA, with 18" throat;

Miller Deltaweld 452 welder with W-22A wire feeder, sn. LA 308814;

Miller Deltaweld 452 welder with W-22A wire feeder, sn. LA193066;

Miller Deltaweld 452 welder with W-22A wire feeder, sn. LA 271253;

Miller Deltaweld CP-250TX welder with W-10A wire feeder, sn.

Hobart model RC250 welder, sn. 81W502963;

Linde model V-1252CV welder;

Miller Deltaweld 452 welder with CP-22 wire feeder, sn. 71-572671;

CD-312 stud welder on portable cart;

Lincoln model V300-PRO welder

Miller 250 welder, sn. LA326326;

Miller Bobcat 225G welder, gas driven;

Millermatic model 300 welder, sn. KJ180005

PLASMA TABLES:

MG industries model E-10 automatic plasma shape cutting table, equipped with Allen Bradley #9 Series control, rails for 60'x12' bed, sn. N/A, sn. TMC4512LP-93-2623;

(2) plasma cutting tables consisting of (3) Thermal Dynamics plasma units (2- 75XL and 1-100XL)  (2) Burny 1250 CNC heads (sn. 99-05-116-04 and 27985-01-01); (2) Aviator XL torches, sn. 1003 and 1172;

Thermal Dynamics model 75XL Pak Master plasma torch;

WIRING AND SWITCHGEAR:

New England wire braiding machine;

Packard Bell wire splicing machine;

(2) Thomas & Betts pneumatic wire terminal crimping machines, model 25000;

(2) Pico wire terminal crimping machines, model 400BHD;

DMC crimp pull testing machine, model MPT-250A;

Molex crimping press, sn. 04581;

(2) Panduit wire crimping presses;

ITT Canon wire stripping machine, sn. 00010;

Cannon - Kenco model 3K-7125 crimping machine, sn. 813027;

Pico model 600 crimping press;

Deutch Terminal proprietary terminal crimping feeding and crimping machine;

American Beauty resistance soldering machine, model 105B2;

Thomas & Betts autofeed terminal crimping machines;

Artos Engineering wire stripping machine;

(3) Essex wire terminal presses;

Essex wire terminal crimping machine, sn. 404;

Essex wire terminal crimping machine, model TC100B;

AMP wire terminal crimper;

Panduit wire crimp press, model SNM THE-405;

(2) Panduit wire terminal crimping presses, model CP-861;

Holman stainless steel conveyor toaster oven;

(2) BK Precision function generators, model 4011;

BK Precision DC power supply, model 1730;

Brady BMXC-Plus wire marking printer;

Brady model LS2000 wire marking printer, sn. 10854;

(1) Eubanks wire feeding and measuring machines, model 6215

(2)  wire dispensing machines;

MISCELLANEOUS:

assorted engineering drawings and schematics from the old Republic Electric & Development Company (REDCO), purchased some years ago by Wilson Manufacturing and used for continuing service work on older REDCO enclosures and switchgear apparatus, this involves maybe a semi-trailer load of flat files, filing cabinets;

lot - (4) sections of warehouse pallet rack shelving;

(3) geared dump scrap  hoppers on wheels;

digital platform scale with remote ElectroScale model 921 readout/scale;

contents of (2) metal shipping containers - consisting of shrink tubing, Panduit terminals, other terminal supplies,etc.;

(2) steel shipping containers;

(2) Powder coat paint lines, with conveyors, motors and controls, units are disassembled since purchase, for parts;

painting equipment;

Delta radial arm saw on table, 230v, missing parts - for scrap;

semi van storage trailer;

Black & Decker model 741 magnetic drill, sn. 9687748;

(6) assorted fiberglass stepladders to 12 feet;

chop saw for cutting hydraulic hose;

Gates model 707 hydraulic power crimping machine;

lBlack & Decker chop saw;

OFFICE:

Xerox model 8830-DDS large document processing system, with folder;

Calcomp Master Plus plotter;

office safe;    

Nortel phone system, with 10 phones;

wireless router and network hub;

other items

Bidders paying in currency in amount of $10,000 or greater will be required to complete IRS Form 8300.

We often are asked how a bidder should bring cashier's checks when the bidder does not know how much he/she will be spending. If you bring cashier's checks made payable to yourself in various increments, you can endorse them over to us and we will refund any overpayment.

We do not accept credit cards or debit cards. We no longer accept "convenience" checks drawn on credit cards since our bank will not process them. 

This auction will have Internet bidding on some items in this auction through Bidspotter.com  You may qualify to bid online by submitting a proper letter from a reliable financial institution guaranteeing payment as outlined above no later than 24 hours before the auction commences. Full payment must be paid by wire transfer before 5pm on the day following the auction. Contact us for specific wire instructions.

A 10% Buyer Fee will be added to all purchases on site.  A 15% Buyer Fee will be added to all purchases made through the Internet.

All items are sold "as is" and "in place" and "with all faults known and unknown". No property is to be removed until paid for in full. Please settle with the cashier within 15 minutes after the close of the auction. The Auctioneer and Owner or their designee reserve the right to add to, split, bunch up, withdraw or delete lots, or bid on Owner's or lien holder's behalf during the course of the auction sale. Sales tax will be charged where applicable. Leased items, if any, are sold subject to Lessor's approval. More detailed terms may be listed in auction day catalog and on the back of your bidder registration card or posted on-site for your review. 

Absentee Bids: If you are unable to attend the auction sale, we can bid for you. You must submit a blank check accompanied by a bank letter guaranteeing payment to Cotten Commercial Auctioneers, Inc. in the amount of your maximum bid plus the Buyer's Fee, if applicable. We will bid for you as if you are actually present, however, we assume no liability to bidders for missed lots where bids are not presented.
Inspection and Preview: Inspection from 10am to 3pm Tuesday, December 16, and from 8:00 AM on auction day. Although every effort has been made to publish reliable information regarding the property to be sold, Cotten Commercial Auctioneers, Inc. makes no warranty, expressed or implied, as to the accuracy of the information contained herein. The description, measurements, model and serial numbers, age, quantities, weights, condition, odometer and hour meter readings as outlined in the brochures and catalogs and invoices are believed to be accurate, but are for merely for the Auctioneer's identification of the respective items and not a warranty that such information is correct. For this reason the buyers should avail themselves of the opportunity to inspect the property to be sold prior to the auction sale. Any announcements made day of sale shall take precedence over prior advertising or printed matter.
Removal of Purchases: All purchases must be removed from the premises before 5pm Wednesday, December 24, 2008. All items are sold "in place" with removal at purchaser's risk and expense. All purchases become the Buyer's responsibility at the time of sale, and the Seller and the Auctioneer assume no responsibility or liability for loss, damage, or injury to persons or property before, during, or after the auction sale. Protect your purchases once the auctioneer says "sold". The bidder agrees to hold harmless, defend, and indemnify Auctioneer for any personal injury or property claims resulting from attendance. This provision shall include unregistered persons attending with bidder. Movers and riggers must provide a valid certificate of insurance prior to dismantling any equipment.

Back to Top