List of Items:

MACHINING:

H.H. Roberts TW60MCV CNC Lathe/Mill, sn. 898729, with Anilam 5300 CNC control, 460v-3ph, possibly missing manuals and software;

Mitsubishi Machining center, model MV65C, sn. V65C005, 1991 model, equipped with 24 station toolholder, possibly missing the CNC control, manuals and software;

Frejoth vertical mill, with 9”x42 milling table;

Clausing Colchester 15 engine lathe;

SMW model MPC-B pallet changer, with (3) 24x43 and (2) 32x20 pallets;

FABRICATING:

MG Industries plasma bridge type CNC cutting table, 1992 model, sn. AP8P-HSG-NC-92-2489, with 9’x17’ water table;

Verson 25Ton Press Brake, sn. 15112, 78”, 480v-3ph;

Mubea KBLH700 ironworker, 220v-3ph, sn. 0169690226604;

Walsh model 65 OBI stamping press, sn. 11412, 65 ton;

Rousselle model “3” 25ton stamping press, sn. DAS464064, 460v-3ph;

150ton hydraulic H-frame press, 4” ram, 230v-3ph, with extra Enerpac ram;

Air Feeds model AF-6 12x18 coil straightener, sn. 941016;

Controlled Automation programmable I-beam and/or angle CNC drilling machine;

Ramco horizontal bandsaw;

Paxson 4-station angle former, 460v-3ph;

Yoder uncoiling machine, 14”;

Miller Regency 350 welder;

Miller Deltaweld 450 welder;

Air Products 250TQ welder;

Miller 250TQ welder;

INSPECTION:

60”x84”x10” Continental black granite inspection table;

36”x72” black granite inspection table with T-slot;

MISCELLANEOUS: 

330 gallons of MAB gray metal primer in 5gallon cans;

(2) aluminum headache racks and air deflectors for tractor/flatbed semi-trailers;

(4) Baldor 15hp 3450rpm 208-230/460v-3ph motors;

(4) assorted plate and beam clamps;

approximately 210,000 feet of 6/20 galvanized guy wire in 1,000 feet cartons;

(11) barrels of Metalcor 6XC guy wire, by Corex, model #MC66XC14250RP, probably over 500,000 feet;

large amount of assorted galvanized tower components, cable, turnbuckles, clips, brackets, fasteners, U-bolts, and other hardware;

(6) assorted sets of fork lift forks in various lengths;

(4) Raymond electric fork lifts;

electro-hydraulic elevating table;

(7) assorted step-down transformers;

Torit model SDF-6 cartridge type dust collector, 460v-3ph, sn. 1G5505306-001;

Harmsco PEP water filtering unit;

spool of Carol 10/3 – FT2 P-7K 123033 machine service cable;

partial spool of Andrew Heliax 1-5/8” CDF 7-50 cable;

(10) assorted filing cabinets;

other items.

Bidders paying in currency in amount of $10,000 or greater will be required to complete IRS Form 8300.

We often are asked how a bidder should bring cashier's checks when the bidder does not know how much he/she will be spending. If you bring cashier's checks made payable to yourself in various increments, you can endorse them over to us and we will refund any overpayment.

We do not accept credit cards or debit cards. We no longer accept "convenience" checks drawn on credit cards since our bank will not process them. 

This auction will have Internet bidding on some items through Bidspotter.com  You may qualify to bid online by submitting a proper letter from a reliable financial institution guaranteeing payment as outlined above no later than 24 hours before the auction commences. Full payment must be paid by wire transfer before 5pm on the day following the auction. Contact us for specific wire instructions.

A 10% Buyer Fee will be added to all purchases on site.  A 15% Buyer Fee will be added to all purchases made through the Internet.

All items are sold "as is" and "in place" and "with all faults known and unknown". No property is to be removed until paid for in full. Please settle with the cashier within 15 minutes after the close of the auction. The Auctioneer and Owner or their designee reserve the right to add to, split, bunch up, withdraw or delete lots, or bid on Owner's or lien holder's behalf during the course of the auction sale. Sales tax will be charged where applicable. Leased items, if any, are sold subject to Lessor's approval. More detailed terms may be listed in auction day catalog and on the back of your bidder registration card. 

Absentee Bids: If you are unable to attend the auction sale, we can bid for you. You must submit a blank check accompanied by a bank letter guaranteeing payment to Cotten Commercial Auctioneers, Inc. in the amount of your maximum bid plus the Buyer's Fee, if applicable. We will bid for you as if you are actually present, however, we assume no liability to bidders for missed lots where bids are not presented.
Inspection and Preview: Inspection from 8:00 AM on auction day. Although every effort has been made to publish reliable information regarding the property to be sold, Cotten Commercial Auctioneers, Inc. makes no warranty, expressed or implied, as to the accuracy of the information contained herein. The description, measurements, model and serial numbers, age, quantities, weights, condition, odometer and hour meter readings as outlined in the brochures and catalogs and invoices are believed to be accurate, but are for merely for the Auctioneer's identification of the respective items and not a warranty that such information is correct. For this reason the buyers should avail themselves of the opportunity to inspect the property to be sold prior to the auction sale. Any announcements made day of sale shall take precedence over prior advertising or printed matter.
Removal of Purchases: All purchases must be removed from the premises before 5pm Wednesday, November 26, 2008. All items are sold "in place" with removal at purchaser's risk and expense. All purchases become the Buyer's responsibility at the time of sale, and the Seller and the Auctioneer assume no responsibility or liability for loss, damage, or injury to persons or property before, during, or after the auction sale. Protect your purchases once the auctioneer says "sold". The bidder agrees to hold harmless, defend, and indemnify Auctioneer for any personal injury or property claims resulting from attendance. This provision shall include unregistered persons attending with bidder. Movers and riggers must provide a valid certificate of insurance prior to dismantling any equipment.

Back to Top